|
A. Heavy Duty Non-skid Coatings- It is a tough
long wearing protective coating that provides safe footing and excellent
traction for personal equipment.
- Urethane Non-skid Coating - Recommended
industrial uses include work areas, ramps, loading docks, walkways,
industrial flooring, machinery spaces, tank roofs, steps, etc.
Marine applications include aircraft carrier decks, roll on/roll off
trailerships, drilling rigs, tug boats, fishing vessels, dredges, etc.
- Epoxy Non-skid Coating (Solvent Based)-
It is recommended for environments where a tough, chemically resistant,
heavy duty non-skid is required. Applications include waste
treatment plants, petroleum facilities, pulp, paper mills, mining
facilities, chemical plants, etc.
- Epoxy Non-skid Coating (Non-Solvent
Based)- Recommended for applications where a heavy duty non-skid is
required but environmental conditions or regulations prohibit
application of solvent based coatings. Applications involve
hospitals, boiler rooms, chemical facilities, petrochemical refineries,
enclosed areas, etc.
B. Self-Leveling Epoxies
- Self-Leveling Epoxies- This high
performance floor system meets OSHA and state VOC regulations and is
available in five colors and clear. It provides a seamless
hygienic coating system that is extremely durable and can be applied to
smooth or mildly spalled concrete where a level, high gloss is
required. This epoxy is especially suitable for clean rooms,
aircraft hangars, laboratories, workshops and light assembly
areas.
- Self-Leveling Epoxies (High Build)- It
provides a heavy duty topping for production and dense traffic areas and
is recommended for use on moderately spalled, eroded or cracked concrete
surfaces where a smooth, high gloss finish is required. It is
available in five colors plus clear and exhibits superior chemical and
abrasion resistance.
C. All Purpose
Epoxy Coating- Is a two component, high
solids, polyamide epoxy coating formulated for demanding industrial and
marine applications. It is a heavy duty interior/exterior coating
which can be applied to concrete, steel and wood surfaces and exhibits
superior resistance to chemicals, moisture, abrasion and impact.
Meets USDA standards for the maintenance protective coatings not in
direct contact with food. It has excellent resistance to alkalies,
acids, solvents, jet fuel and grease. This product is also
available as a three component anti slip floor coating where safety and
durability are prime requirements.
D. Epoxy Resurfacer - This product is a three
component, trowelable epoxy surfacing and leveling compound for new and old
concrete floors where a high degree of chemical abrasion resistance is
required. The physical properties are much greater than
concrete. Excellent abrasion and impact resistance recommend it for
high traffic areas. It's 100% reactive epoxy formulation conforms to
present OSHA & USDA requirements,
permitting applications in any food processing facility. This seamless
resurfacer provides a barrier to bacterial growth and is designed for use
where sanitary, chemical resistant, antiskid floor is
required.
E. Chemical Resistant Epoxy Coating and Tank Lining
- A two component, catalyzed epoxy that is particularly suited as a tank
coating in the petroleum products industry. Excellent chemical
resistance to crude oil, diesel fuel, kerosene, gasohol, unleaded and leaded
gasoline and jet fuel makes it a superior tank lining as well as a coating
for chemical moats and concrete around acid pumps.
F. Other Secondary Containment
Systems: Outstanding
Performance in Corrosive Environments -
- Penetrating Epoxy Primer- This penetrating
primer protects bare concrete, old or new. It can be used on all bare
concrete surfaces, where a two component penetrating primer is
recommended. Its low viscosity and quick tack help to ensure fast,
efficient new installations, as well as very rapid turnarounds for scheduled
or unscheduled downtime. For second coats, use this Penetrating Epoxy
Primer and then use the Acid Resistant Novolac Coating (below) for the
topcoat.
- Acid Resistant Novolac Coating - Two
component, 100% solids, high build protective coating resists severe attack
by chemicals, petrochemicals, acids and alkalies. Protects concrete
floors and walls around storage tanks, pumps, process vessels and other
equipment from corrosive environments. Tough, durable, even impervious
to spills and splashes of concentrated 98% sulphuric acid. Protect
your plant with this excellent investment for environmental compliance.
G. Monolithic Flooring
Systems......
You can pour a seamless floor that combines a clear
self-leveling epoxy with decorative ceramic fired color aggregates.
|
®
ALPHASOURCE®
On-Line
Help us save our environment